Anti Slip Peel And Stick Vinyl Flooring 2.0mm Deep Embossed

We are manufacturer who mainly supply floors and solutions for distributors,whole salers,and project contractors.The MOQ for each color is 1500square meters.
 
Self-adhesive PVC flooring,easy installation,anti-slip
 
The main selling point of self-adhesive floor is its ability to simulate natural materials which makes it a great alternative to both hardwood and stone. Additionally, it’s also produced to mimic its natural counterparts in shape, too. Luxury vinyl is either produced as 100% vinyl or a vinyl/limestone composite and those products that are made to look like stone will often contain natural minerals.
 
Performance of vinyl flooring
-Water proof,damp-proof
can be installed in the kitchen and bathroom
-Super wear resistance
high polymer transparent wear layer protect the floor from scratch or hurt
-Fire retardant:reach to Bf1 only second to the real marble
 
For vinyl flooring,it consists of
1.wear layer:with good wear resistance for protecting flooring broken.
2.Print film:with vivid design,look like real wood or marble which is the most important part of the floor.
Good design of print film will attract more customers buy your floors.
3.The Basic layer:That is important for floor's size and thickness.
4.The glue layer:with paper protection 

Naturally water resistance and stain resistance PVC flooring planks for residential and industrial flooring application. Available in numerous Wooden Designs, Marble designs, and carpet designs. Both for Domestic and Enterprise application.
 
Detailed Product Description:
1. High quality vinyl PVC flooring
2. UV coating surface, different embossing
3. Realistic natural wood,marble and carpet colour
4. More than 1000 patterns for your selection
5. Super wear resistance ,suitable for household and commercial usage
6. Eco-friendly material,light weight,environmental protection
7. fire resistant, waterproof , anti-slip
 
How To Install Peel-and-Stick Vinyl Flooring Over Existing Flooring
 
 
Installing peel-and-stick vinyl flooring over existing flooring is a relatively straightforward DIY project. Here’s a step-by-step guide:

Materials and Tools Needed:

• Peel-and-stick vinyl tiles or planks
• Ruler or measuring tape
• Utility knife or vinyl cutter
• Straightedge or T-square
• Adhesive remover (if needed)
• Floor cleaner
• Level (optional)
• Primer (if required for better adhesion)

Steps:

1. Prepare the Existing Floor:

   Clean Thoroughly: Ensure the existing floor is clean, dry, and free of any dust, dirt, or grease. Use a suitable cleaner to remove any residues.
   • Remove Debris: Remove any loose or damaged flooring pieces. For carpets or rugs, these must be completely removed.
   • Smooth Surface: If the existing floor has any high spots, cracks, or holes, address these issues. You may need to use a floor patch or self-leveling compound to create a smooth surface.

2. Measure and Plan:

   • Measure the Area: Measure the room to determine how many tiles or planks you need. Start laying the tiles from the center of the room to ensure a symmetrical look.
   • Dry Fit Tiles: Lay out the tiles without removing the backing to visualize the pattern and adjust as needed. This helps in planning the layout and avoiding small, awkward cuts along the edges.

3. Apply the Peel-and-Stick Tiles:

   • Start from the Center: Once you’re happy with the dry fit, start applying the tiles from the center of the room. This helps ensure that any small cuts will be along the edges where they’re less noticeable.
   • Peel and Stick: Peel the backing off the tile and press it firmly onto the existing floor. Use a rolling pin or a cloth to press down and ensure good adhesion.
   • Align Tiles: Make sure each tile or plank is aligned properly with the previous one. Press firmly to eliminate air bubbles and ensure a secure bond.

4. Cut and Fit:

   • Trim Edges: Use a utility knife or vinyl cutter to trim any tiles that need to fit around corners or edges. Use a straightedge or T-square to ensure straight cuts.
   • Fit Around Obstacles: For areas around obstacles like door frames or cabinets, measure carefully and make precise cuts to ensure a snug fit.

5. Finishing Touches:

   • Check for Gaps: Inspect the floor for any gaps or loose tiles. Press down on any loose edges to ensure they are firmly adhered.
   • Clean Up: Sweep or vacuum the floor to remove any dust or debris that might have accumulated during installation.

Additional Tips:

• Temperature: Ensure the room is at the recommended temperature for installation (usually between 65-85°F) to help the adhesive perform well.
• Acclimate the Tiles: Allow the vinyl tiles to acclimate to room temperature for a few hours before installation to prevent expansion or contraction.

By following these steps, you should achieve a smooth and professional-looking vinyl floor installation over your existing flooring.

Is peel and stick vinyl flooring any good?

Peel and stick vinyl flooring can be a good option, depending on your needs and circumstances. Here are some pros and cons to consider:

Pros:

1. Ease of Installation:

   • Peel and stick vinyl flooring is incredibly easy to install. You don’t need special tools or adhesives, making it a great DIY project.

2. Affordability:

   • It's generally more affordable than other flooring options like hardwood, tile, or even traditional vinyl plank flooring.

3. Variety:

   • There are many styles, colors, and patterns available, allowing you to customize the look of your space.

4. Temporary Solution:

   • Ideal for renters or those looking for a temporary solution, as it can be removed relatively easily without damaging the underlying surface.

5. Water Resistance:

   • It’s often water-resistant, making it suitable for kitchens, bathrooms, and basements.

Cons:

1. Durability:

   • Peel and stick vinyl is typically less durable than traditional vinyl plank or tile flooring. It can wear out faster, especially in high-traffic areas.

2. Surface Preparation:

   • The surface underneath needs to be very clean, smooth, and dry. Any imperfections can affect adhesion and the final look.

3. Adhesion Issues:

   • Over time, especially in areas with fluctuating temperatures or humidity, the adhesive might weaken, causing tiles to peel up.

4. Thickness:

   • It tends to be thinner than other types of flooring, which can make it less comfortable underfoot and less forgiving to any imperfections in the subfloor.

5. Lower Resale Value:

   • It’s generally not considered a high-end option, so it might not add as much value to your home as other types of flooring.

Conclusion:

Peel and stick vinyl flooring is a good choice if you're looking for an affordable, easy-to-install, and customizable flooring option, especially in low-traffic or temporary situations. However, if you need something more durable and long-lasting, you might want to consider other options.