2019-06-20
Step 2Hold the next plank at a slight angle against the previous plank's end and fold down to click it into place.How to Install Vinyl Plank Flooring
Install vinyl plank flooring over concrete, wood or existing vinyl flooring for a durable floor that against moisture.
Prepare for Installation
At least 48 hours prior to installation, place the new vinyl plank flooring in the room for acclimation. During installation, mix planks from different boxes to blend the dye lots and patterns for a more uniform appearance.
Instructions
Step1.Remove the baseboards/skirting
Step2.Buy floor moulding trim as needed
Plan the Floor
Keep in mind that some walls are bowed not straight, so it’s important to create a starting line square to the room.Some sub-ground is not flat,we should make it flat by leveling agent.
Instructions
Step1,Mark the center of each wall and snap lines between them with a chalk line
Measure from the center to the starting wall, subtracting the 5/16-inch expansion gap, and mark this distance at each end of the wall. Snap a chalk line between these two marks to get a straight line against the wall.
The First Row
Getting the first row down properly helps ensure a successful project.
Instructions
Score and cut the tongue off the first row of vinyl planks using a utility knife. Set the first plank in place on the starting line with the cut side toward the wall, maintaining the expansion gap.
To cut the last piece to fit, score with a utility knife and snap the plank.
It has not ended,for more information,please pay attention on our next news
Send your inquiry directly to us
